http://thessdreview.com/ssd-guides/o...ation-guide-2/

Приняв некоторый советы с этой статьи можно заметно увеличить производительность вашего SSD и сэкономить на свободном месте. Если кому то не понятен англйиский язык - пишите здесь.


Способ переключения SSD mode с IDE в AHCI:

The following technique can be used to switch between IDE-mode and AHCI-mode (the native mode for SATA) drivers in Vista or Windows 7:

1) Run the Registry Editor (regedit.exe)
2) Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\Msahci
3) Set the "Start" value to 0 (zero)
4) Navigate to Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\Pciide
5) Set the "Start" value to 0 (zero)
6) Shut down
7) Start up again, but before Windows boots go into the BIOS configuration screens and change the disk mode to "AHCI". Save the new BIOS configuration and restart so that Windows boots.

When Windows starts, it will detect the change, load new disk drivers, and do one more reboot to start up with them.